handbook:handbook:patchcable
Pach Cable
To make a “Patch” cable you just need to follow the EIA/TIA 568-B standard.
Pins 1 & 2 and 3 & 6 from one end are connected to pins 1 & 2 and 3 & 6 on the other end. The pinouts looking from the bottom of the cat5 ends (White/Orange starts on the left) are as follows:
| Standard End | Standard End |
|---|---|
| Pin 1 White/Orange | Pin 1 White/Orange |
| Pin 2 Orange | Pin 2 Orange |
| Pin 3 White/Green | Pin 3 White/Green |
| Pin 4 Blue | Pin 4 Blue |
| Pin 5 White/Blue | Pin 5 White/Blue |
| Pin 6 Green | Pin 6 Green |
| Pin 7 White/Brown | Pin 7 White/Brown |
| Pin 8 Brown | Pin 8 Brown |
handbook/handbook/patchcable.txt · Last modified: by 127.0.0.1